manualshive.com logo in svg

JVC Digital Video Camera GR-D24, Instructions Manual

Share
Download
JVC Digital Video Camera GR-D24 Instructions Manual Download Page 26

EDITING

26 

EN

MasterPage: Left

It is also possible to transfer still/moving images to a PC 
with a DV connector by using the provided software, 
software equipped with the PC or commercially available 
software.

NOTES:

●

Refer to “SOFTWARE INSTALLATION AND DV 
CONNECTION GUIDE” for the installation of the bundled 
software and drivers.

●

The software operation manual is provided as PDF file on 
the CD-ROM.

●

It is recommended to use the AC Adapter as the power 
supply instead of the battery pack. (

墌

pg. 7)

●

When using a DV cable, be sure to use the optional 
JVC VC-VDV206U or VC-VDV204U DV cable depending 
on the type of DV connector (4 or 6 pins) on the PC.

●

The date/time information cannot be captured into the PC.

●

Refer to the instruction manuals of the PC and Software.

●

The system may not work properly depending on the PC or 
capture board you are using.

Connection To A Personal Computer

PC with DV 
connector

To DV OUT

To DV 
connector

Core filter

Core filter

DV cable (optional)

GR-D24EK_07Advanced.fm  Page 26  Thursday, November 27, 2003  7:55 AM

Summary of Contents for Digital Video Camera GR-D24









































Reviews:

No comments

Brands by name

Popular brands

Load more brands