Dismounting the Screen
0
The top of the screen frame is secured by inserting the two pins inside its top surface into the two square holes on top of
the main unit.
0
The bottom of the screen frame is held by the magnetic force of the three magnetic catches attached inside the main unit.
And there are light shielding sponges between the inside of the sides of the screen frame and the outside of the sides of
the main unit which will create some resistance when pulling out the bottom of the screen frame.
0
It is not necessary to remove the screws on the top, bottom and sides of the screen frame.
A
Pull the bottom of the screen frame out to disengage from the magnets
B
Slide the screen frame upward until the two pins inside its top surface are pulled out of the square holes on top of the main
unit
C
Remove the screen towards yourself
.
C
A
B
Magnetic Catch
Hole
Square Hole
Pin
Pin
Screen
Frame
Center of Rotation
Light Shielding
Sponge
Cleaning the Screen
0
When the screen is dirty, wipe gently with a soft cloth (flannel cloth recommended).
0
If the screen is very dirty, wipe with a soft cloth dampened with isopropyl alcohol.
0
Take note that rubbing the screen too hard can cause scratches.
46
Maintenance
