MENUS FOR DETAILED ADJUSTMENT
34
EN
MasterPage: Left
DISPLAY
●
The following menu settings can be changed only
when the Power Switch is set to “REC”.
●
The DISPLAY settings except “BRIGHT” and
“LANGUAGE” are effective only for shooting.
[ ]
= Factory-preset
pg. 17, “Brightness Adjustment Of The
/
/
/
[ENGLISH]
/
FRANÇAIS
/
ESPAÑOL
/
PORTUGUÊS
The language setting can be changed.
(
[OFF]
: The date/time does not appear.
ON
: The date/time is always displayed.
●
The date indication can also be turned on/off by
pressing the
DISPLAY
Button on the remote
control. (
LCD
: Keeps the camcorder’s display (except the
date, time and time code) from appearing on the
connected TV screen.
[LCD/TV]
: Makes the camcorder’s display
appear on screen when the camcorder is
connected to a TV.
[OFF]
: Time code is not displayed.
ON
: Time code is displayed on the camcorder
and on the connected TV. Frame numbers are
not displayed during recording.
OFF
: Automatic demonstration will not take
place.
[ON]
: Demonstrates certain functions such as
Wipe/Fader and Effects, etc., and can be used
to confirm how these functions operate.
Demonstration starts in the following cases:
●
When the Menu Screen is closed after “DEMO
MODE” is turned “ON”.
●
With “DEMO MODE” set to “ON”, if there is no
operation for about 3 minutes after the Power
Switch is set to “REC”.
●
Performing any operation during the
demonstration stops the demonstration
temporarily. If no operation is performed for more
than 3 minutes after that, the demonstration will
resume.
NOTES:
●
If a cassette is in the camcorder, the
demonstration cannot be turned on.
●
“DEMO MODE” remains “ON” even if the
camcorder power is turned off.
DSC
[ ]
= Factory-preset
[FINE]
/
STANDARD
The Picture Quality mode can be selected to
best match your needs. Two Picture Quality
modes are available: FINE (
) and
STANDARD (
) (in order of quality).
NOTE:
The number of storable images depends on the
selected picture quality as well as the composition
of the subjects in the images and the type of
memory card being used. (
640 x 480 / 1024 x 768 / [1280 x 960]
The Image Size mode can be selected to best
match your needs.
NOTE:
The setting can be changed only when the
VIDEO/
MEMORY
Switch is set to “MEMORY”.
[
(TAPE)]
: When Snapshot recording is
performed with the
VIDEO/MEMORY
Switch set
to “VIDEO”, still images are recorded only onto
the tape.
/
(TAPE/CARD)
: When Snapshot
recording is performed with the
VIDEO/
MEMORY
Switch set to “VIDEO”, still images
are recorded not only onto the tape but also in
the memory card (640 x 480 pixels).
BRIGHT
CLOCK ADJ.
LANGUAGE
DATE/TIME
ON SCREEN
TIME CODE
DEMO MODE
DEMO
QUALITY
IMAGE SIZE
REC SELECT
GR-D650US.book Page 34 Tuesday, August 29, 2006 8:04 AM
