JVC D-ILA LD-HD2KBE, Instructions Manual

Page: 20 / 72

20
Adjustments and Settings Using Menus
The menus of this unit form a structure as shown below. Characters are displayed in English only.
The Setup menu is displayed on the LCD. The OSD menu will be displayed on the screen through the projector that is
connected to this unit.
SET: NTSC SCANRATE
(Output scan rate setting for NTSC signals)
SET: PAL SCANRATE
(Output scan rate setting for PAL signals)
SET: ACTIVE OUTPUT
(Output signal setting)
SET: SCREEN SHAPE
(Screen shape setting for projector)
SET: ANALOG BLACK LVL
(Level setting for black analog signals)
SET: COMP SYNC ON H
(Composite sync signal setting)
●
This setting is not required.
SET: INPUT HD H-ADJUST
(Horizontal position of HD signals)
SET: DVI INPUT LEVEL
(Level setting for DVI digital input signals)
SET: VIDEO INPUT
(Input setting for composite video signals)
SET: S-VIDEO INPUT
(Input setting for S-video signals)
SET: RGB INPUT
(Input setting for RGB signals)
SET: YCrCb INPUT
(Input setting for component video signals)
SET: DVI INPUT
(Input setting for DVI digital signals)
SET: PASSTHRU INPUT
(Pass-through input setting)
SET: RGB INPUT SYNC
(RGB sync signal setting)
SET: DVI INPUT H SYNC
(Horizontal sync signal setting during DVI input)
SET: OSD
(On-screen display setting)
SET: OSD TIMER
(OSD timer setting)
SET: LCD TIMER
(LCD timer setting)
SET: RS232 ECHO
(RS-232C echo setting)
SET: BAUD RATE
(RS-232C baud rate setting)
SET: SCREEN TRIGGER
(Screen trigger setting)
SET: 1080i TO 1080p
(Output rate setting for 1080i signals)
SET: NTSC PROFILE
(Profile setting for NTSC signals)
SET: PAL PROFILE
(Profile setting for PAL signals)
SET: RESTORE FACTORY
(Default setting)
Input-
Formats-Input
Formats-Aspect
Profile-Recall
Profile-Store
Picture-
Brightness
Contrast
Color
Tint
Detail
Adv Color
Display-
Position-Horizontal (does not function on this
processor)
Position-Vertical (does not function on this processor)
Border Lvl
Left (Border)
Right (Border)
Bottom (Border)
Top (Border)
Patterns-
Test Pattern
Select (Pattern)
Items for Setting in the Setup Menu
Items for Setting in the OSD Menu
LD-HD2KU_E.book Page 20 Thursday, November 17, 2005 4:27 PM