JVC Connected Cam GY-HC900CHE Instructions Manual Download Page 180

Page: 180 / 236

Connecting via SDI

Digital video signals, together with embedded

(superimposed) audio signals and time code

signals, are output for both the 3G-SDI/HD-SDI

and SD-SDI signals.

Memo :

The sampling frequency for embedded

(superimposed) audio signals is 48 kHz. Time

code of the built-in time generator as well as

playback time code are also output.

Setting the Aspect

For setting the mode to convert images with a

16:9 aspect ratio to display on a 4:3 aspect ratio

screen.

Set using [A/V Set]

[Video Set]

[SD

Aspect].

The available modes include “Side Cut”, “Letter”

(blackened at the top and bottom), and

“Squeeze” (full size, compressed at the left and

right).

(

P134 [ SD Aspect ] )

Memo :

When [Record Format]

[System] is set to “SD”,

and [SD Aspect] is set to “4:3”, this item cannot be

selected.

When [Record Format]

[System] is set to

“SD”

, and [SD Aspect] is set to “16:9”,

“Side Cut” in [A/V Set]

[Video Set]

[SD

Aspect] cannot be selected.

Connecting a Remote

Control Unit

The switch functions of the camera recorder can be

configured using the remote control unit.
* Remote control units supported: RM-LP25U,

RM-LP55U, RM-LP20G

Attaching Core Filter Beforehand

Before using the remote control unit, attach the

core filter (small) to the remote cable of the

remote control unit.

Release the

stopper.

5 cm

Wind twice

To be connected to the camera recorder. [Core filter (small)]

Connect the remote control unit to the

camera recorder.

Connect the remote cable of the remote control

unit to the [REMOTE] terminal.

REMOTE

Connect to the
Remote Control
Unit

Caution :

Turn off the power of the camera recorder when

connecting a remote control unit.

Turn on the power of the camera recorder.

Set the operate switch of the remote control

unit to ON.

Precautions on Using the Remote Control Unit

When the switches of the camera recorder and

remote control unit are operated at the same

time, the switch operation of the remote control

unit takes priority over that of the camera

recorder.

Focus and zoom operations cannot be

performed using the remote control unit.

The shutter speed may vary slightly from the

value displayed on the camera recorder.

While the camera recorder is in the Media mode,

the Auto White Balance feature does not

function even if you operate it from the remote

control unit.

180

Connecting External Monitor

Con
nectin

g Externa

l Devices

Summary of Contents for Connected Cam GY-HC900CHE













































































































































































































































Search results

Summary of Contents for Connected Cam GY-HC900CHE

Reviews:

Related manuals for Connected Cam GY-HC900CHE

Brands by name

Popular brands

JVC Connected Cam GY-HC900CHE, Instructions Manual

Search results

Summary of Contents for Connected Cam GY-HC900CHE

Reviews:

Related manuals for Connected Cam GY-HC900CHE

Brands by name

Popular brands