9
White Level
For configuring the white level during adjustment of
the dynamic range that is visible in the LCD monitor
or viewfinder when [Color Space] is set to “HLG”.
When [Color Space] is set to “HLG” and [Convert
to ITU709] is set to a value other than “Off”, this item
can be used to configure the output luminance level
(%) of HLG videos that corresponds to 100% on
the ITU709 gamma curve during the conversion.
[Setting Values: 80.0%, 77.5%, 75.0%,
R
72.5%,
70.0%, 67.5%,65.0%, 62.5%, 60.0%, 57.5%,
55.0%, 52.5%, 50.0%]
Memo :
0
This item can be configured only when [Color
Space] is set to “HLG”.
0
The value on the spot meter changes in tandem
with this setting.
Example: When [White Level] is set to “75.0%”,
the point at which the HLG output is 75% is
displayed as 100% on the spot meter.
0
Refer to [Tone Mapping Characteristics for
Converting HLG to ITU709 for LCD/VF]
P 231) for each characteristic. Conversion
to the ITU709 color space is performed with
gamma and knee adjusted such that the
maximum HDR dynamic range is visible during
the conversion.
LCD RGB Gain
For adjusting the R (red), G (green) and B (blue)
gain level of the LCD monitor.
[Setting Values: +127 to
R
0 to -128]
9
Reset
Restores [LCD RGB Gain] to the default settings.
VF RGB Gain
For adjusting the R (red), G (green) and B (blue)
gain level of the viewfinder.
[Setting Values: +127 to
R
0 to -128]
9
Reset
Restores [VF RGB Gain] to the default settings.
Shooting Assist Item
Focus Assist
For setting whether to add color to the contour of
the focused image upon switching the image to
black-and-white.
[Setting Values: On,
R
Off]
9
Type
For configuring the behavior when operating the
user button that is assigned with the [Focus
Assist] function.
0
ACCU-Focus:
Enables the Focus Assist and ACCU-Focus
(forced focus) functions. The depth of field of the
object becomes shallower to enable easier
focusing. The ACCU-Focus function switches
automatically to “Off” after about 10 seconds.
0
Normal:
Enables only the Focus Assist function. The
focused area is displayed in color to enable
easier focusing. Display color can be specified
with [Color].
[Setting Values: ACCU-Focus,
R
Normal]
9
Color
For setting the display color of the focused area
when Focus Assist is activated.
[Setting Values:
R
Blue, Green, Red]
Zebra
For selecting whether the number of zebra patterns
to display at the bright areas of the subject.
0
2 Patterns:
Displays two types of zebra patterns (Zebra1
and Zebra2).
0
1 Pattern:
Displays one type of zebra pattern (Zebra1).
[Setting Values: 2 Patterns,
R
1 Pattern]
9
Detect
For configuring the timing to detect the zebra
pattern display.
0
Converted ITU709:
Performs detection after converting to the
ITU709 color space.
0
HLG/J-Log1:
Performs detection before converting to the
ITU709 color space.
[Setting Values: Converted ITU709,
R
HLG/J-
Log1]
Memo :
0
This item is selectable only when [Color
Space] is set to “J-Log1” or “HLG” and [Convert
to ITU709] is set to “Cam” or “Cam + Return”.
126
LCD/VF Menu
Menu
Display and
D
etailed
S
etti
ngs
Summary of Contents for Connected Cam GY-HC900CHE
Page 2: ...2 ...
