background image

2

 EN

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety informa-
tion and precautions contained in the following pages to ensure safe use of your new camcorder.

Warning on lithium battery

The battery used in this device may present a
fire or chemical burn hazard if mistreated. Do
not recharge, disassemble, heat above 100°C or
incinerate.
Replace the battery with Maxell, Panasonic
(Matsushita Electric), Sanyo or Sony CR2025;
use of another battery may present a risk of fire
or explosion.

n

Dispose of used battery promptly.

n

Keep away from children.

n

Do not disassemble and do not dispose of in
fire.

PAL

n

Camcorder is designed exclusively for the VHS-C video cassette. Only cassettes marked VHS-C can be
used with this unit.

n

HQ VHS is compatible with existing VHS equipment.

SAFETY PRECAUTIONS

Using This Instruction Manual

• All major sections and subsections are listed in the Table Of Contents (

Z

 pg. 3).

• Notes appear after most subsections. Be sure to read these as well.
• Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

.... refer to the Index (

Z

 pg. 40 – 42) and familiarize yourself with button locations, etc. before use.

.... read thoroughly the Safety Precautions that follow and cautions (

Z

 pg. 43, 44). They contain extremely

important information regarding the safe use of your new camcorder.

CAUTIONS:

n

To prevent shock, do not open the cabinet.
No user serviceable parts inside. Refer
servicing to qualified personnel.

n

When you are not using the AC Power
Adapter/Battery charger for a long period of
time, it is recommended that you disconnect
the power cord from AC outlet.

WARNING:
TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR

MOISTURE.

This camcorder is designed to be used with
PAL-type colour television signals. It cannot be
used for playback with a television of a different
standard. However, live recording and
viewfinder playback are possible anywhere.
Use the BN-V12U/V22U/V25U battery packs
and, to recharge them, the provided multi-
voltage AC Power Adapter/Charger. (An
appropriate conversion adapter may be
necessary to accommodate different designs of
AC outlets in different countries.)

NOTES:

The rating plate (serial number plate) and
safety caution are on the bottom and/or the
back of the main unit.

The rating plate (serial number plate) of the
AC Power Adapter/Charger is on its bottom.

This unit is produced to comply with Standard
IEC Publ. 65.

Summary of Contents for Compact VHS













































Reviews: