background image

9

English

Adjusting the Volume

Turn the VOLUME control clockwise to increase the volume or counterclockwise to decrease it.
Turning the VOLUME control quickly also adjusts the volume level quickly.
When using the Remote Control, press the  button to increase the volume or press the
VOLUME – button to decrease it.
You can adjust the volume level between 0 and 50.

CAUTION: Volume cannot be adjusted while the System is in STANDBY
mode. DO NOT turn on the Unit and/or start playing any source without
setting the VOLUME control to 0; otherwise, the sudden blast of sound
can damage your hearing, speakers and/or headphones.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.
Be sure to turn down the volume before connecting or putting on headphones.

Reinforcing the Bass Sound

The richness and fullness of the bass sound is maintained regardless of how low you set the volume.
You can use this effect only for playback.

To get the effect, 

press the ACTIVE BASS EX. (Active Bass Extension) button.

The frame around the “A.BASS EX” indicator lights up.

To cancel the effect,

 press the button again.

The frame around the “A.BASS EX” indicator goes out.

Sound Modes

The System has some preset sound effects that give you control of the way your music sounds, so you can
tailor it for your room and for the quality of the source. We can give you some idea of how each one
affects the music, but the only way to really tell is to try them yourself.
o

The preset sound modes include modes using surround effects and modes using S.E.A. effects.

o

Sound Mode effects cannot be recorded.

Surround effect modes

D. CLUB (Dance Club)

Increases resonance and bass.

HALL

Adds depth and brilliance to the sound, like in a concert hall.

STADIUM

Adds clarity and spreads the sound, like in an outdoor stadium.

S.E.A. effect modes

ROCK

Boosts low and high frequencies.

CLASSIC

Set for wide and dynamic sound stereo systems.

POP

Good for vocal music.

To get an effect,

 press the SOUND MODE button repeatedly until the Sound Mode you want appears

on the display. The frame around the “S.MODE” indicator lights up.
Each time you press the SOUND MODE button, the display changes
as shown below:

=

 

D. CLUB 

=

 HALL 

=

 STADIUM 

=

 ROCK 

=

 CLASSIC 

=

 POP 

=

 FLAT

 

=

 (back to the

beginning)

To cancel an effect,

 press the SOUND MODE button until “FLAT” appears

on the display. The frame around the “S.MODE” indicator goes out.

To recall the previous Sound Mode, 

press the SOUND MODE button again.

VOLUME

SOUND

MODE

ACTIVE

BASS EX.

SOUND

MODE

or

or

VOLUME

SOUND

MODE

ACTIVE

BASS EX.

S.MODE

S.MODE

A.BASS EX

A.BASS EX

PHONES

 EN.01-36.MX-J111V[U]/f

99.9.17, 3:57 PM

9

Summary of Contents for CA-MXJ111VU











































Reviews: