(No.MB666<Rev.005>)1-11
3.1.8
Removing the Amp board (See Fig.13)
(1) Disconnect the Earth wire from Bottom chassis connected
to post pin
PP701
of the Amp board.
(2) Disconnect the flat cable wire from Micom board connected
to connector
CN700
,
CN701
and
CN702
of the Amp board.
(3) Disconnect the card wire from Mic board connected to con-
nector
CN750
of the Amp board.
(4) Disconnect the card wires from Micom board connected to
connectors
CN705
and
CN706
of the Amp board.
(5) Disconnect the flat cable wire from Headphone jack board
connected to connector
CN760
of the Amp board.
(6) Remove the one screw
M
attaching the Amp board.
Fig.13
3.1.9
Removing the Micom board (See Fig.14, 15)
(1) Disconnect the card wire from FL board connected to con-
nector
CN500
of the Micom board. (See Fig.14)
(2) Disconnect the card wire from Cassette mechanism A con-
nected to connector
CN501
of the Micom board. (See
Fig.14)
(3) Disconnect the flat cable wire from PLAY button board con-
nected to connector
CN430
of the Micom board. (See
Fig.14)
(4) Remove the four screws
N
attaching the Power transform-
er. (See Fig.15)
Fig.14
Fig.15
M
PP701
CN700
CN701
CN702
CN750
CN760
CN706
CN705
CN501
CN500
CN430
N
N
Summary of Contents for CA-DXJ11
Page 57: ... M E M O ...
