The BR-EN900 encoding (HEVC and H.264) Start/Stop is controlled in the
Actions
section of the GUI.
In order to make any changes to encoding parameters, each channel must be stopped and restarted
after changes are applied. To automatically start encoding upon power ON, save
Configuration
and
enable the
Auto Start
.
Configuration
captures the current status of the encoder with all associated
settings, so channels must be running prior to saving the
Configuration
.
Saved
Configuration
Auto Start
enabled
Zixi Server
Input ID
Zixi Server
Input ID
Password
Preset Latency (ms) Error Correction Overhead
100
-
1,499
FEC + ARQ
up to 30%
1,500 - 8,000
ARQ only
5%
Streaming to Zixi Server.
Latency value affects the efficiency of error
correction and should be selected based on the
quality of the Internet connection.
Zixi streaming protocol features the most resilient video transport over the
Internet and is highly recommended for sending live video over WANs.
Channel Name
and
Password
should match the Zixi server settings.
UDP Packet
Size consideration:
Each data transfer protocol encapsulation increases the packet size.
When packet size exceeds the MTU, it will be fragmented.
Some ISPs reject fragmented packets due to security concerns.
Rejected packets = lost packets, video may become corrupted.
When using Zixi or Pro-MPEG protocols, streaming via Bonded LTE
(or other VPN) it is recommended to reduce the
UDP Packet Size
to 1128.
Start / Stop encoding
Full version of
User Manual
is located in the
Help
section or at pro.jvc.com
Zixi Server
IP Address
FEC
– Forward Error Correction
ARQ
– Automatic Repeat Request
