Display Mode
For managing the e-shift status
v
and the lighting condition of the light sources.
Setting
Description
Normal
Only the laser light source lights up.
NV
Only the IR light source lights up.
e-shift
v
This is the mode for displaying e-shift. Only the laser light source lights up.
NV(e-shift)
v
This is the mode for displaying e-shift. Only the IR light source lights up.
NV(FS)
The laser light source and IR light source light up alternately frame by frame.
NV(e-shift FS)
v
This is the mode for displaying e-shift. The laser light source and IR light source
light up alternately frame by frame.
3D
This is the mode for displaying 3D videos.
0
The selectable “Display Mode” settings vary according to input signal.
List of selectable “Display Mode” according to input signal
Input Signal
Display Mode
Single (DP1-DP4)
24, 25, 30, 50, 60 Hz
Normal / NV
Dual - stripes
50, 60 Hz
Quad - stripes
60 Hz
Quad - cross
Dual - stripes
120 Hz
Normal / NV / e-shift
v
/
NV(e-shift)
v
/ 3D
Quad - stripes
Quad - cross
Dual - frame sequential
50 Hz, 60 Hz
Normal / NV / e-shift
v
/
NV(e-shift)
v
/ NV(FS) /
NV(e-shift FS)
v
/ 3D
Quad - frame sequential
60 Hz
No signal
Normal / e-shift
v
Out of range
Normal
e-shift polarity
v
For switching the polarity of e-shift.
Setting
Description
Positive
Activates e-shift using positive polarity signal.
Negative
Activates e-shift using negative polarity signal.
0
This function cannot be used except when “Display Mode” is set to “e-shift”, “NV(e-shift)”, “NV(e-shift FS)” or “3D”.
IR Enhance Mode
For switching the function to support the power of the IR light source.
Setting
Description
Off
Disables the support function.
On
Enables the support function.
32
Adjust/Set
