manualshive.com logo in svg

JVC 1203-FOH-ID-VP, Instructions Manual

Share
Download
JVC 1203-FOH-ID-VP Instructions Manual Download Page 44

Master Page: Left-start

44

 

EN

RE
FERENCES

DETAILS

ITEMS

NOTES

V

 Power (

墌

pg. 11)

●

Perform charging where the temperature is between 10°C and 35°C (50°F and 
95°F). 20°C to 25°C (68°F to 77°F) is the ideal temperature range for charging. If 
the environment is too cold, charging may be incomplete.

●

Charging times are for a fully discharged battery pack.

●

Charging time varies according to the ambient temperature and the status of the 
battery pack.

●

To avoid interference with reception, do not use the AC Power Adapter/Charger 
near a radio.

●

Since the AC Power Adapter/Charger processes electricity internally, it becomes 
warm during use. Be sure to use it only in well-ventilated areas.

V

 VIDEO PLAYBACK 

(

墌

pg. 18)

●

When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may 
be difficult to see.

●

The cassette holder cannot be opened unless a power supply is attached.

●

There may be a delay after you open the cassette holder cover until the cassette 
holder opens. Do not use force.

●

Once the cassette holder is closed, it recedes automatically. Wait until it recedes 
completely before closing the cassette holder cover.

●

“TAPE END” appears when the tape reaches its end, and the power goes off 
automatically if left in this condition for 5 minutes. “TAPE END” also appears 
when a cassette at its end is loaded.

CU-VH1US.book  Page 44  Friday, November 28, 2003  8:01 PM

Summary of Contents for 1203-FOH-ID-VP

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands