Justin JF-460-2600 User Manual Download Page 1

BEFORE INSTALLING AND USING THE PRODUCT, 

PLEASE READ THE INSTRUCTIONS THOROUGHLY, 

AND RETAIN THEM FOR FUTURE REFERENCE. 

PRODUCT OVERVIEW 

       

Included

: (1x) Flashlight Power Bank, (1x) USB Charging  

    

Cable and (1x) Nylon Lanyard

SPECIFICATIONS

To ensure safe operation, check your device’s

compatibility with Flashlight specifications prior to use.

 

CHECKING POWER LEVELS

USE

Before first use, it is recommended to charge the 
Flashlight via the Micro USB Input Port with the supplied 
Micro USB Cable. The Flashlight will take approximately 4 
hours to charge from 0-100%.

1. Charging the Flashlight:

 

  Plug the supplied Micro USB Cable into the Flashlight’s 

Micro USB Input Port. Next, insert the USB end of the 
charging cable into a computer or AC power source 
with a USB Output Port of 5V. While charging, the 3 
blue LED Indicator Lights will FLASH to show the 
power level. When the Flashlight is fully charged, all 3 

LEDs will stop flashing and stay lit. 

See “Checking 

Power Levels”.

2. Charging Your Smartphone, Etc:

  Using your device’s supplied charging cable (Apple

®

 

Lightning

 cable, Micro USB cable, etc.), plug your 

smartphone, tablet or other USB powered device into 
the USB Output Port of the Flashlight. Press and Hold 
the Power Button on the Flashlight for Two Seconds to 
begin charging your device. The Green LED will turn on 
and remain on to indicate your device is charging. 
Charging will continue until your device is fully charged 
or the Flashlight’s internal battery has drained.

Important: Please check voltage compatibility with your device 
prior to use.

3. Using the Flashlight:

 

Disconnect all cables and devices from the Flashlight 
before use. The LED Torch is operated by pressing the 
Power Button.

 

The Flashlight operates in four light 

modes: 

Normal, Extra Bright, Flashing, SOS & OFF. 

Push the Power Button to cycle through each light 
mode. To stop charging or turn OFF the Flashlight at 
any time, push and hold the Power Button for Two 
seconds. 

Please Note: The Green LED will remain lit briefly.

LED FLASHLIGHT / BATTERY LIFE

PLEASE NOTE

•  The Flashlight comes pre-packaged with a partial charge, 

NOT a full charge. We recommend fully charging your 
Flashlight before first use for best performance.

•  The Flashlight’s LED Indicator represents the estimated 

power levels. Actual charge may vary. 

•  If your device (smartphone, tablet, etc.) is not charging, 

this may be a sign that the battery level of the Flashlight 
is very low and needs to be recharged.

•  It is normal for the Flashlight to become slightly warm 

during use.

•  The Flashlight has an Over-Charge Protection circuit to 

help prevent damage to the internal battery when charging.

•  The Flashlight cannot charge an external device while 

charging the internal battery via the Micro USB Input Port.

•  The Flashlight can NOT charge any external devices 

while using the LED Torch.

•  Your Power Bank includes a special built-in Micro USB to 

USB cable. Some devices, namely BlackBerry® devices, 
REQUIRE this cable for charging. If you do not use this  
supplied cable, your device might not charge.

•  In some instances, some older Samsung

®

 Tablets require 

you to turn OFF the tablet prior to charging. 

MAINTENANCE

In order to keep your Flashlight operating at maximum 
potential, please follow these guidelines:

1.

 Recharge the Flashlight every 2 months when not in use. 

Charge to at least 40%, as this will extend the battery life.

2.

 Keep your Flashlight dry and away from moist and 

corrosive materials. DO NOT get wet. In addition,    

never expose to high heat environments. Avoid extreme 
temperatures of hot or cold as it will decrease the overall 
battery performance.

CAUTIONS

Please read this section carefully before using.
•  Only use this product with confirmed power sources that 

follow device specifications. Device is intended to be 

used with iPhone

®

, mobile phones and other digital 

products. Only use specified charging methods or 

reputable branded chargers that are compatible with 

specified device specifications.

•  Do not use product beside or in close proximity to a heat 

source such as a ventilation heat vent, convection heater, 

burner, etc.

•  Do not expose device to moisture or submerge it in liquid. 

Do not leave device inside an excessively hot or cold 

environment. Store device in a cool and dry environment 

at all times.

•  Avoid dropping or applying excessive shock and force to 

device. Do not use in unprotected outdoor environments 

or in exposed sunlight for a prolonged period of time.

•  Do not use device in a confined space. Restricted or 

insufficient airflow will put device at risk of overheating.

•  Avoid touching metal prongs when plugging and 

unplugging device from power source.

•  Do not use harsh chemicals to clean device. Use a damp 

cloth with warm water to wipe off any dirt. Only clean the 

device when it is unplugged from any power source.

•  Ensure charge port is clear of any foreign objects before 

using. Do not force incompatible connectors into any port. 

•  Do not used damaged cables and wires with device.

•  Do not attempt to disassemble the device. Any attempts 

to do so will void all warranties on this product. Do not 

attempt to remove or salvage batteries for other purposes.

•  Never look into light beam directly or with optical 

instruments. Point light beam so that it is directed below 

eye level.

•  Do not point the light beam at mirrors or other reflective 

surfaces.

•  Never point the light beam directly at a person or an 

animal. The light beam can cause damage to eyes or skin.

•  Please also observe the safety and operating instructions 

of any other devices which are connected to the product.

•  When traveling, keep the flashlight in a case to avoid the  

flashlight accidentally being turned on, which may drain 

battery, or cause a fire.

•  The device is not a toy. Keep it out of the reach of 

children and pets.

SAFETY INSTRUCTIONS

Read all instructions and warnings prior to using this 

product. This device contains a Lithium Ion (Li-ion) 

Battery. Improper use, storage and disposal may cause 

leaks, expansions and explosions that could lead to fires, 

health concerns, bodily injury and property damage.

•  Upon the event where the device may be broken, shattered, 

or in any way physically compromised DO NOT USE.

•  Do not dispose device into standard garbage disposal sites. 

Dispose of device at available Battery Recycling Sites after 

fully discharging battery. Not doing so may violate local 

disposal laws and regulations.

•  NOTE: Opening of product and/or removal of battery will 

render product inoperative and voids manufacturer 

warranties, dispose of remaining product components in 

accordance with local laws.

•  If unusual expansion is detected, disuse device immediately. 

In case of fire, use lithium approved “Class D Type” Fire 

Extinguishers on device.

•  Do not expose or dispose of device into fire.

•  In the unfortunate case of a leak and electrolyte comes in 

contact with skin, wash area with water and soap. 

  If electrolyte makes contact with eyes, flush with generous 

amounts of water for 15 minutes and seek medical attention 

immediately. Avoid inhaling fumes if applicable. Do not 

attempt to reuse damaged device.

•  Do not charge device with unspecified power source. Only 

use specified method of charge and reputable brand OEM 

chargers compatible with device specifications.

FCC STATEMENT

Warning: Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void 

the user authority to operate the equipment.

NOTE:

 This equipment has been tested and found to 

comply with the limits for Class B digital device, pursuant 

to part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, 

uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, 

may cause harmful interference to radio or television 

reception, which can be determined by turning the 

equipment off and on. The user is encouraged to try to 

correct the interference by one or more of the following 

measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and the 

receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV

  technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC 

RULES. OPERATION IS SUBJECT TO THE FOLLOWING 

TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE 

HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST 

ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING 

INTERFERENCE THAT MAY CAUSE UNDESIRED 

OPERATION.

CALIFORNIA PROP 65 WARNING

WARNING:

 This product contains chemicals known to 

the State of California to cause birth defects or other 
reproductive harm. For more information on these 
regulations and a list of chemicals, log on the following 
website address: 

http://www.oehha.ca.gov/prop65.html

INNOVATIVE TECHNOLOGY ELECTRONICS CORP.

LIMITED WARRANTY: 90 DAYS LABOR, ONE YEAR PARTS

Innovative Technology Electronics Corp. (IT) warrants the product to be free from 
“Defects” in materials under normal use for a period of “One Year” from the date of 
the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial 
“90 Day” period, to repair or replace the product if it is determined to be defective at 
“No Charge”. It is further agreed that IT will cover the cost to repair or replace 
damaged “Parts” only for a total period of “One Year” from the date of the original 
purchase. The warranty does not cover cosmetic damage, antennas, AC cords, 
cabinets, headbands, ear-pads, or damage due to line power surges, connection to 
improper voltage supply or settings, misuse, mishandling, accident, acts of God or 
attempted repair by an unauthorized service agent.
To obtain service, the purchaser MUST present an original sales receipt / proof of 
purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return 
Material Authorization) number to return products for service or replacement. Returns 
without an RMA number on the package will be refused and returned to sender. 
Upon receipt of the returning item and our full inspection (IT) may issue a 
replacement to customer for the same item or of one that has equivalent value and 
features. To return an item, supply full name, return address, phone number, item 
purchased, receipt of purchase and reason for return to obtain RMA number.  
All returns must be in the original packaging or reasonable substitute to prevent 
damage. Customer “Must” include full name, shipping address and telephone 
number inside of package. No return will be shipped back to a PO Box or
APO address.

Please include your check or money order in the amount of:

 USD$5.00 for items $10.00 to $39.99 (Price Paid Per Unit)

 USD$10.00 for items $40.00 to $99.99. (Price Paid Per Unit)

 USD$16.00, for items $100.00 and up. (Price Paid Per Unit)

 Shipping fees are non-refundable

To be payable to Innovative Technology Electronics Corp.(for handling and return 
shipping charges) (IT) will not be responsible for delays or unprocessed claims 
resulting from a purchaser’s failure to provide any / all of the necessary information. 
Send all inquiries or RMA request via our website: 
www.ithomeproducts.com/support.

Innovative Technology Electronics Corp.

1 Channel Drive, Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.ithomeproducts.com/support
 

There are no express warranties except as listed above.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE 
EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY 
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR 
IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY 
APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE 
DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential 
damages, or limitations on how long an implied warranty lasts, so the above 
exclusions or limitations may not apply to you. This warranty gives you specific legal 
rights and you may also have other rights, which vary from state to state.

NOTE: As a result of continual improvements, the 
design and specifications of this product are 
subject to change without notice.

Apple and iPhone are trademarks of Apple Inc., registered in the U.S. 

and other countries. Lightning is a trademark of Apple Inc. 

Smartphones and Tablets are NOT included.

CAN ICES-3 (B) / NMB-3 (B) 

2,600mAh LED Flashlight

with Smartphone Charger

Model:

JF-460-2600

USER MANUAL

1

by

Summary of Contents for JF-460-2600











Reviews: