7 Maintenance
23
Precondition:
The start screen is displayed�
T
Touch the time area to open the Cockpit�
T
Touch
‘Clean the milk system’
�
T
Touch
‘Next’
�
‘Cleaning agent for milk system’
/
‘Connect the milk tube’
T
Remove the milk pipe from the milk container or milk cooler�
T
Pour one dosing unit of milk system cleaner into the container
for milk system cleaning�
T
Place the container under the dual spout and connect the milk
pipe with the container�
E
To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector�
T
Slide the dual spout down to fix the container in place�
T
Touch
‘Start’
�
The dual spout and the milk pipe are cleaned�
The operation stops automatically�
If insufficient foam is produced when the milk is frothed or milk
sprays out of the dual spout, the spout may be dirty� If this happens,
dismantle and rinse the dual spout�
T
Remove the milk pipe and rinse it thoroughly under running
water�
T
Press the releasing devices and pull the cover of the dual spout
up and off�
6
Dismantling and rinsing the
dual spout
