47
8.11. Dual Band Integration
When enabled, 2.4G and 5G Wi-Fi will use the same network name, and the router will
automatically select the best Wi-Fi network for the terminal. If the terminal device is close to
the router, it switches to 5G network, otherwise it connects to 2.4G network. However, due
to differences of terminal devices, there may be some problems, such as the network may
be interrupted for a short time when the signal source is automatically switched, or even the
line may be dropped.
1) After logging in to your router, click
Basic
>
Wireless
>
Enable Dual Band Integration
.
2) Click
Save
to finish your setting.
Note:
-We recommend only modifying
SSID Name
and
Password
, and keeping other settings as
defaults.
-After completing the settings, it will take about 30 seconds for the router to restart.
Summary of Contents for RX4-1800
Page 1: ......
