45
8.10. LAN Settings
The router is preset with a default LAN IP 192.168.4.1, which you can use to log in to its web
management page. The LAN IP address, together with the subnet mask, also defines the
subnet that the connected devices are in. If the IP address conflicts with another device on
your local network or your network requires a specific IP subnet, you can change it.
8.10.1. Change Login Address (LAN IP Address)
1) After logging in to your router, click
Basics
>
LAN
>
LAN IP Configuration
.
Manually set IP address as the following format 192.168.0.XXX (XXX is any number of 2~254),
and leave the
Subnet Mask
as the default setting. Then, click
Save
to finish your settings.
2) You need reconnect the router and enter the address you set to log in to the setting page,
instead of the default 192.168.4.1.
8.10.2. DHCP Server Settings.
1) After logging in to your router, click
Basics
>
LAN
>
DHCP Server Settings
.
2) Here you can turn on or off the DHCP server and modify the IP address segment
automatically assigned by DHCP (default setting is recommended).
Summary of Contents for RX4-1800
Page 1: ......
