Juplink RX4-1800 Page 4 User Manual Download | Manualshive

Page: 4 / 65

background image

4

About This Manual

This manual is a complement of Quick Installation Guide. The Quick Installation Guide
instructs you on quick internet setup, and this guide provides details of each function and
shows you the way to configure these functions appropriate to your needs.
When using this manual, please notice that features of the router may vary slightly
depending on the model and software version you have, and on your location, language, and
internet service provider. All screenshots, images, parameters and descriptions documented
in this manual are used for demonstration only.

*Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11
specifications. Actual wireless data throughput and wireless coverage are not guaranteed
and will vary as a result of network conditions, client limitations, and environmental factors,
including building materials, obstacles, volume and density of traffic, and client location.
*Use of MU-MIMO and 1024-QAM requires clients to also support those functions.

More Info

The latest software, management app and utility can be found at Download Center

at

https://www.juplink.com/

The Quick Installation Guide can be found where you find this manual or inside the package
of the router.
Specifications can be found on the product page at:

https://www.juplink.com

.

Our Technical Support contact information:

[email protected]
+ 1-833-923-2468, EST 9:00-17:00 (Mon.-Fri.)

«
...
2
3
4
5
6
...
»

Summary of Contents for RX4-1800


































































Reviews:

No comments

Related manuals for RX4-1800

Brand: Hamlet Pages: 77

Brand: UNICOM Pages: 1

Brand: NETGEAR Pages: 98

Brand: 4IPNET Pages: 194

Brand: PRO-NETS Pages: 72

Brand: Z-Com Pages: 18

Infinity ZIP 500

Brand: Harman Pages: 7

Brand: Ubiquiti Pages: 28

Brand: Ubiquiti Pages: 32

WAP51AB - Instant Wireless - Access Point

Brand: Linksys Pages: 2

Brand: Billion Pages: 2

BiPAC 74xx series

Brand: Billion Pages: 8

Brand: Abocom Pages: 2

Brand: iBall Baton Pages: 62

Brand: DQ Technology Pages: 43

Brand: BRANDLUXE Pages: 49

Brand: Kaba Pages: 2

Brand: EnGenius Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands