Juplink EC3-750 User Manual Download Page 2

Page: 2 / 28

About This Manual .................................................................................................................... 3

Chapter 1 Get to Know About Your Wi-Fi Range Extender ....................................................... 4

1.1. Product Overview ........................................................................................................... 5

1.2. Panel Layout ................................................................................................................... 5

Chapter 2 Connect the Hardware.............................................................................................. 7

2.1. Connect Your Extender ................................................................................................... 8

2.2. Position Your Extender ................................................................................................... 9

Chapter 3 Log In to Your Extender .......................................................................................... 10

Chapter 4 Set Up Internet Connection .................................................................................... 12

4.1. Set up the Extender as an Repeater/Client (default) ................................................... 13

4.2. Set up the Extender as an Access Point ........................................................................ 15

4.3. Set up the Extender as a Router ................................................................................... 17

Chapter 5 Maintaining the Extender ....................................................................................... 20

5.1. Changing the User Name and Password of the Range Extender ................................. 21

5.2. Save/Import your settings ............................................................................................ 21

5.3. Upgrade Firmware ........................................................................................................ 22

5.4. Change LAN IP Address ................................................................................................. 23

5.5. View connected devices ............................................................................................... 23

FAQ .......................................................................................................................................... 24

FCC statement ......................................................................................................................... 28

Summary of Contents for EC3-750





























Search results

Summary of Contents for EC3-750

Reviews:

Related manuals for EC3-750

Brands by name

Popular brands

Juplink EC3-750, User Manual

Search results

Summary of Contents for EC3-750

Reviews:

Related manuals for EC3-750

Brands by name

Popular brands