wiJAC2-002
Wireless Intercom System - Wireless Dropcord - N America
Operating Manual
Rev A
Page 8
2.2.4.3
Controls
These buttons are recessed to prevent accidental activation. The Boot (
BT
) Pair (
PR
) and Reset (
RST
) buttons
should only be adjusted by qualified technical personnel.
2.2.4.4
Connectors
PWR
(Charging Port)
The Charging Port (marked
PWR
) is a 2.1 mm coaxial jack on the bottom left side of the battery compartment. To
charge NiMH batteries, connect a USB to Type M 2.1 mm Plug from the Charging Port to a USB power source.
CONFIG
(Mode Select)
The Configuration Port (marked CONFIG) on the bottom right side of the battery compartment is for factory use only.
2.3
Other Features (Both units)
2.3.1
Battery Lid Release
The battery compartment lid release is a thumbscrew on the rear of the unit.
2.3.2
Belt Clip
The belt clip is on the rear of both the JB60-002 Headset Adapter and the JB69-002 Intercom Adapter. Ensure that
the units are attached securely.
