Problem
Possible cause
Remedy
The display shows "12.00".
There was a power cut.
Reset the clock.
There is no good cooking
performance using the True
Fan Cooking PLUS function.
You did not activate the True
Fan Cooking PLUS function.
Refer to "Activating the True
Fan Cooking PLUS function".
There is no good cooking
performance using the True
Fan Cooking PLUS function.
You did not fill the cavity em-
bossment with water.
Refer to "Activating the True
Fan Cooking PLUS function".
The water in the cavity em-
bossment does not boil.
The temperature is too low.
Set the temperature at least
to 110 °C.
Refer to “Hints and tips”
chapter.
The water comes out of the
cavity embossment.
There is too much water in
the cavity embossment.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with a
cloth or sponge. Add the cor-
rect amount of water to the
cavity embossment. Refer to
the specific procedure.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
INSTALLATION
WARNING!
Refer to Safety
chapters.
24
