Junker+ JM46GA50, Instruction Manual

Page: 32 / 92

32
vegetables, fish or poultry. Only use fresh ingredients. Use a
high-sided dish with a lid.
Resting time
Once the programme has finished, the food should be allowed
to rest for another approx. 5-10 minutes so it reaches an even
temperature.
Setting the time-setting options
Your oven has various time-setting options. You can use the
0
button to call up the menu and switch between the individual
functions. As long as the symbols are lit, you can make
settings. The
N
arrow shows you the time-setting option that is
active. A time-setting option that has already been set can be
changed directly with the
@
or
A
button when the
N
arrow is
next to the relevant time symbol.
Setting the timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own audible signal. In this way,
you can tell whether it is the timer or a cooking time which has
elapsed.
1.
Press the 0 button once.
The time symbols light up in the display and the N arrow is
next to
S
.
2.
Use the @ or A button to set the timer duration.
Default value for @ button = 10 minutes
Default value for A button = 5 minutes
After a few seconds, the time setting is adopted. The timer
starts. The N S symbol lights up in the display and the timer
duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds. 0:00 is shown in the display. Use the
0
button to switch off the timer.
Changing the timer duration
Use the @ or A button to change the timer duration. After a few
seconds, the change is adopted.
Cancelling the timer duration
Use the
A
button to reset the timer duration to 0:00. The
change will be adopted after a few seconds. The timer is
switched off.
Checking the time settings
If several time-setting options are set, the corresponding
symbols are illuminated on the display. The timer counts down
in the foreground. The S symbol is preceded by the N arrow
and the timer can be seen counting down.
To check the
S timer, x cooking time or 0 clock, press the
0 button repeatedly until the arrow points to the appropriate
symbol. The value is shown for a few seconds on the display.
Setting the cooking time
The cooking time for your meal can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the picture: Cooking time of 45 minutes.
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature or grill
setting.
3.
Press the
0
button twice.
20:00 is shown in the display. The time symbols light up and
the arrow
N
is next to
x
.
4.
Use the
@
or
A
button to set the cooking time.
5.
Press the
†
button.
The oven starts. The cooking time counts down in the display
and the
N x
symbol lights up. The other time symbols go out.
The cooking time has elapsed
An audible signal sounds. The oven stops heating. 0:00 is
shown in the display. Press the 0 button. The audible signal
stops. Turn the function selector to the off position. The oven is
switched off.
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the
display. Press the
0
button. The signal stops. Turn the function
selector to the zero position. The oven switches off.
Programme
no.
Weight range
in kg
Combi ­ cooking
08
Bake, frozen*
(up to 3 cm in height)
0.40 - 1.20
* Use ovenware without a lid
09 Chicken, whole* 0.50 - 2.00
10 Sirloin, medium* 0.50 - 1.50
11 Pork neck joint 0.50 - 2.00
12 Lamb, medium 0.80 - 2.00
13 Meat loaf* 0.50 - 1.50
14 Fish, whole 0.30 - 1.00
15
Rice stew using fresh ingre-
dients
0.05 - 0.20
Programme
no.
Weight range
in kg
* Use ovenware without a lid