Juniper XRE200 -, Hardware Manual

Page: 38 / 188

Table 14: AC Power Cord Specifications
Plug Standards Electrical Specifications Country/Region
AS/NZ 3112–1993 250 VAC, 10 A, 50 Hz Australia
GB2099.1 1996 and GB1002 1996
(CH1-10P)
250 VAC, 10 A, 50 Hz China
CEE (7) VII 250 VAC, 10 A, 50 Hz Europe (except Italy, Switzerland, and
United Kingdom)
CEI 23–16/VII 250 VAC, 10 A, 50 Hz Italy
JIS 8303 125 VAC, 12 A, 50 Hz or 60 Hz Japan
CEE 7/4 250 VAC, 10A, 50 Hz Korea
NEMA 5-15 125 VAC, 13 A, 60 Hz North America
SEV 1011 SEV 6534/2 250VAC, 10A, 50 Hz Switzerland
BS 1363A 250 VAC, 10 A, 50 Hz United Kingdom
DC Power Supply in an XRE200 External Routing Engine
An XRE200 External Routing Engine supports two 560 W DC power supplies.
The DC power input (-48 VDC and return) requires a dedicated customer site circuit breaker. We recommend
that you use a two-pole 20-amp DC circuit breaker, or whatever is required by local code.
Each DC power supply contains a single DC power input, status LEDs, an ejector lever, handle, and a fan.
See Figure 12 on page 39 .
38