Juniper XRE200 -, Hardware Manual

Page: 185 / 188

•
GR-63-CORE: NEBS, Physical Protection
•
The equipment is suitable for installation as part of the Common Bonding Network (CBN).
•
The equipment is suitable for installation in locations where the National Electrical Code (NEC) applies.
•
The battery return connection is to be treated as an Isolated DC return (DC-I), as defined in
GR-1089-CORE.
•
You must provision a readily accessible device outside of the equipment to disconnect power. The
device must also be rated based on local electrical code practice.
Compliance Statements for Acoustic Noise for EX
Series Switches
This topic applies to hardware devices in the EX Series product family, which includes EX Series switches,
the EX Series Redundant Power System (RPS), and the XRE200 External Routing Engine.
Maschinenlärminformations-Verordnung - 3. GPSGV, der höchste Schalldruckpegel beträgt 70 dB(A) oder
weniger gemäss EN ISO 7779
Translation: The emitted sound pressure is below 70 dB(A) per EN ISO 7779.
Statements of Volatility for Juniper Network Devices
A statement of volatility (SoV)—sometimes known as letter of volatility (LoV)—identifies the volatile and
non-volatile storage components in Juniper Networks devices, and describes how to remove non-volatile
storage components from the device.
NOTE: Individual FRUs do not have separate SoV or LoV documents. They are covered in the
SoV or LoV of the Juniper Networks device in which they are installed.
NOTE: Statements of volatility are not available for all Juniper Networks devices.
185