Environmental Requirements and Specifications for SSR1300
The SSR1300 must be housed in dry, clean, well-ventilated, and temperature-controlled environment.
Follow these environmental guidelines:
• The site must be dust-free because dust can clog air intake vent, reducing the efficiency of the
cooling system.
• Maintain ambient airflow for normal operation. If the airflow is blocked or restricted, or if the intake
air is too warm, the appliance might overheat.
The following table lists the environmental specifications for the SSR1300.
Table 10: Environmental Specifications for SSR1300
Description
Value
Operating temperature
0° C to 40° C (32° F to 104° F)
Storage temperature
-20° C to 70° C (-4° F to 158° F)
Clearance Requirements for Hardware Maintenance of SSR1300
When planning the site for installing an SSR1300, you must allow sufficient clearance around the
installed chassis.
• For the operating temperature of the SSR1300 to be optimal, the airflow around the chassis must be
unrestricted. See
for more information about the airflow through the
chassis.
• For service personnel to remove and install hardware components, and to accommodate the
interface and power cable bend radius, there must be adequate space at the front and rear of the
appliance. Allow at least 24 in. (61 cm) of space both at the front and the rear of the appliance.
• If you are mounting the appliance in a rack with other equipment, or if you are placing it on the
desktop near other equipment, ensure that the exhaust from other equipment does not blow into the
intake vents of the chassis.
19
