Juniper SSG 20-WLA, Hardware Installation And Configuration Manual

Page: 7 / 82

Organization
„ vii
About This Guide
The Juniper Networks Secure Services Gateway (SSG) 20 device is an integrated
router and firewall platform that provides Internet Protocol Security (IPSec) Virtual
Private Network (VPN) and firewall services for a branch office or a retail outlet.
Juniper Networks offers two models of the SSG 20 device:
„ SSG 20 Ethernet only
„
SSG 20-WLAN which has four integrated wireless interfaces.
Both of the SSG 20 devices support auxiliary (AUX), universal storage bus (USB)
storage, and two mini physical interface module (PIM) slots that can hold any of the
mini PIMs. The devices also provide protocol conversions between local area
networks (LANs) and wide area networks (WANs).
Organization
This document contains the following chapters:
Chapter 1, “Hardware Overview,” describes the chassis and components of an
SSG 20 device.
Chapter 2, “Installing and Connecting the Device,” describes how to install an SSG
20 device in a standard 19-inch equipment rack and how to connect cables and
power to the device.
Chapter 3, “Configure the Device,” describes how to configure and manage an
SSG 20 device and how to perform some basic configuration tasks.
Chapter 4, “Servicing the Device,” describes service and maintenance procedures
for an SSG 20 device.
Appendix A, “Specifications,” provides general system specifications for an SSG 20
device.
Appendix B, “Initial Configuration Wizard,” describes the Initial Configuration
Wizard steps.