Juniper SSG 20-WLA, Hardware Installation And Configuration Manual

Page: 63 / 82

„ III
Figure 2: Wireless Access Point County Code Window
4. Physical Ethernet Interface Window
On the interface-to-zone bindings screen, you set the interface to which you want to
bind the Untrust security zone. Bgroup0 is prebound to the Trust security zone.
Ethernet0/1 is bound to the DMZ security zone but is optional.
Figure 3:
After binding an interface to a zone, you can configure the interface. Depending on
which interfaces you have installed on your device, mini PIM-specific configuration
windows are displayed. To continue configuring your device with the ICW, click
Next .