Juniper SSG 20-WLA, Hardware Installation And Configuration Manual

Page: 62 / 82

SSG 20 Hardware Installation and Configuration Guide
II „
17. Confirmation Window on page XIX
1. Rapid Deployment Window
Table 1: Rapid Deployment Window
If your network uses NetScreen-Security Manager, you can use a Rapid Deployment
configlet to automatically configure the SSG device. Obtain a configlet from your
Security Manager administrator, select the
Yes option, select the Load Configlet
from: option, browse to the file location, then click Next . The configlet sets up the
device for you.
If you want to bypass the configuration wizard and go directly to the WebUI, select
the last option, then click
Next .
If you are not using a configlet to configure the device and want to use the
configuration wizard, select the first option, then click
Next . The ICW welcome
screen appears. Click Next . The Administrator Login Window appears.
2. Administrator Login Window
Enter a new administrator login name and password, then Click Next .
Figure 1: Admin Login Window
3. WLAN Access Point Window
If you are using the device in the WORLD regulatory domain, you must choose a
country code. Select the appropriate option, then click
Next .