Juniper SRX5600, Hardware Manual

Page: 415 / 483

•
If you are not using a mechanical lift and the chassis weight is not fully supported by a shelf or another
device, three people should grasp the chassis while a fourth person unscrews and removes the
mounting screws from the rack. The three lifters can then move the chassis to the shipping container.
9. Place the services gateway in the shipping crate or onto the pallet. If on a pallet, bolt the services
gateway to the pallet.
10. Cover the services gateway with an ESD bag and place the packing foam on top of and around the
services gateway.
11. Replace the accessory box on top of the packing foam.
12. Securely tape the box closed or place the crate cover over the services gateway.
13. Write the RMA number on the exterior of the box to ensure proper tracking.
Packing SRX5600 Services Gateway Components for Shipment
Follow these guidelines for packing and shipping individual components of the services gateway:
•
When you return a component, make sure that it is adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
•
Use the original shipping materials if they are available.
•
Place the individual component in an electrostatic bag.
•
Write the Return Materials Authorization (RMA) number on the exterior of the box to ensure proper
tracking.
CAUTION: Do not stack any of the services gateway components during packing.
418