Juniper SRX5400, Hardware Manual, Page: 226 / 394

Initially Configuring the SRX5400 Services Gateway
This procedure connects the device to the network but does not enable it to forward
traffic. For complete information about enabling the device to forward traffic, including
examples, see the appropriate Junos OS configuration guides.
To configure the software:
1.
Verify that the device is powered on.
2.
Log in as the root user. There is no password.
3.
Start the CLI.
root# cli
root@>
4.
Enter configuration mode.
configure
[edit]
root@#
5.
Set the root authentication password by entering either a cleartext password, an
encrypted password, or an SSH public key string (DSA or RSA).
[edit]
root@#
set system root-authentication plain-text-password
New password: password
Retype new password: password
6.
Configure an administrator account on the device. When prompted, enter the password
for the administrator account.
[edit]
root@#
set system login user admin class super-user authentication
plain-text-password
New password: password
Retype new password: password
7.
Commit the configuration to activate it on the device.
[edit]
root@#
commit
8.
Log in as the administrative user you configured in step 6.
9.
Configure the name of the device. If the name includes spaces, enclose the name in
quotation marks (“ ”).
configure
[edit]
admin@#
set system host-name host-name
10.
Configure the IP address and prefix length for the Ethernet management interface on
the services gateway’s Routing Engine.
[edit]
admin@#
set interfaces fxp0 unit 0 family inet address address/prefix-length
Copyright © 2017, Juniper Networks, Inc. 200
SRX5400 Services Gateway Hardware Guide