Juniper SRX5400, Hardware Manual

Page: 91 / 394

OK/FAIL
LED, one bicolor:
•
Steady green–The port module is operating normally.
• Red–The port module has failed and is not operating normally.
•
Off–The port module is powered down.
LINK
LED, single color, one per port:
• Steady green–The link is active.
• Off–No link.
TX/RX
LED, single color, one per port:
•
Blinking green–The port is receiving or transmitting data.
• Off–No activity.
LEDs
The serial number label is located as shown in Figure 40 on page 65 .
Figure 40: Port Module SRX-IOC-16GE-TX Serial Number Label
g030305
JX0123
Serial number
ID label
Serial Number Location
Related
Documentation
Cards Supported on SRX5400, SRX5600, and SRX5800 Services Gateways on page 29
•
•
Flex I/O Card (SRX5K-FPC-IOC) Specifications on page 60
Flex I/O Card Port Module SRX-IOC-4XGE-XFP Specifications
You use port modules and Flex I/O Cards (Flex IOCs) to add different combinations of
small form-factor pluggable transceiver (SFP), 10-gigabit SFP transceiver (XFP), and
copper ports to your services gateway to suit the specific needs of your network. The
SRX-IOC-4XGE-XFP port module (
Figure 41 on page 66 ) installs into a Flex IOC to add
four 10-Gigabit Ethernet XFP ports.
65 Copyright © 2017, Juniper Networks, Inc.
Chapter 4: Line Card and Module Description