Juniper SRX5400, Hardware Manual, Page: 64 / 394

•
Processor subsystem, which includes a 1.2-GHz CPU, system controller, and 1 GB of
SDRAM.
• LEDs on the faceplate that indicate the SPC and SPU status.
SPC with four SPUs Description
• Junos OS Release 12.1X44-D10 and later Software release
CHASSIS CLUSTER CONTROL 0 and CHASSIS CLUSTER CONTROL 1 –SFP ports for control links in chassis
cluster configurations.
Supported SFP transceivers:
1000BASE-LH (model numbers SRX-SFP-1GE-LH, SRX-SFP-1GE-LH-ET)
1000BASE-LX (model numbers SRX-SFP-1GE-LX, SRX-SFP-1GE-LX-ET)
1000BASE-SX (model numbers SRX-SFP-1GE-SX, SRX-SFP-1GE-SX-ET)
Cables and
connectors
None Controls
• SRX5400–Any slot except bottom slot
0
• SRX5600–Any slot except bottom slots
0
or
1
•
SRX5800–Any slot except center slots 0 or 1
Supported Slots
450 W typical, 585 W maximum
NOTE:
•
In the SRX5600 and SRX5800 Services Gateways, you must have high-capacity power supplies (either
AC or DC) and high-capacity fan trays installed in the services gateway in order to install and use
SRX5K-SPC-4-15-320 SPCs. If you do not have high-capacity power supplies and fan trays installed,
the services gateway will log an alarm condition when it recognizes the SRX5K-SPC-4-15-320 SPCs.
• On SRX5600 Services Gateways with AC power supplies, we recommend that you use high-line (220v)
input power to ensure the device has adequate power to support SRX5K-SPC-4-15-320 SPCs.
Power
Requirement
Approximately 18 lb (8.3 kg) Weight
Copyright © 2017, Juniper Networks, Inc. 38
SRX5400 Services Gateway Hardware Guide