Juniper SRX4200, Hardware Manual

Page: 51 / 100

•
Baud rate—9600
• Parity—N
• Data bits—8
•
Stop bits—1
•
Flow control—none
Configuring Junos OS on the SRX4200
•
SRX4200 Services Gateway Software Configuration Overview on page 51
• SRX4200 Services Gateway Factory-Default Settings on page 51
• Viewing Factory-Default Settings on page 51
•
Configuring the SRX4200 Services Gateway on page 52
SRX4200 Services Gateway Software Configuration Overview
The services gateway is shipped with Junos OS preinstalled and ready to be configured
when the services gateway is powered on. If you are setting up the services gateway for
the first time, use the CLI to perform the initial configuration.
SRX4200 Services Gateway Factory-Default Settings
Your services gateway comes configured with a factory-default configuration.
Table 24 on page 51 and Table 25 on page 51 lists the factory-default settings.
Table 24: Factory-Default Settings - Interfaces
IP Address Interface
192.168.1.1/24 fxp0
Table 25: Factory-Default Settings - Services
Services
SSH
HTTPS
NETCONF over SSH
Viewing Factory-Default Settings
To view the factory-default settings on your services gateway:
1.
Log in as the root user and provide your credentials.
2.
View the list of default config files:
51 Copyright © 2019, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration