![Juniper SRX-4600 Hardware Manual Download Page 163](http://html1.mh-extra.com/html/juniper/srx-4600/srx-4600_hardware-manual_2032311163.webp)
Class 1 LED Product Warning | 169
Juniper Networks devices are equipped with laser transmitters, which are considered a Class 1 Laser
Product by the U.S. Food and Drug Administration and are evaluated as a Class 1 Laser Product per EN
60825-1 requirements.
Observe the following guidelines and warnings:
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following safety guidelines to
prevent eye injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING:
Unterminated optical connectors can emit invisible laser radiation.
The lens in the human eye focuses all the laser power on the retina, so focusing
the eye directly on a laser source—even a low-power laser—could permanently
damage the eye.
167
Summary of Contents for SRX-4600
