Juniper QFX5110, Hardware Manual

Page: 67 / 222

Virtual Chassis Fabric Hardware Overview
The Juniper Networks Virtual Chassis Fabric (VCF) spine-and-leaf architecture supports
two types of hardware configurations based on the switch model used as the spine in
the VCF.
•
QFX5110 VCF
• QFX5110-32Q (spine or leaf)
• QFX5110-48S (leaf)
•
QFX5100-24Q (leaf)
•
QFX5100-48S (leaf)
• QFX5100-96S (leaf)
• QFX5100 VCF
• QFX5100-24Q (spine or leaf)
•
QFX5100-48S (spine or leaf)
•
QFX5100-48T (leaf)
• QFX5100-96S (leaf)
• QFX3600 (leaf)
•
QFX3500 (leaf)
•
EX4300 (leaf)
Homogeneous configurations are Installations with all members within the same line of
switches (for example, QFX5100-24Q, QFX5100-48S, QFX5100-48T, and QFX5100-96S
in a QFX5100 VCF). QFX5100 VCF installations with a mixture of models are called mixed
mode. For example, a mixed mode QFX5100 VCF might contain a EX4300 or QFX3600
as leaf devices. Mixed mode devices must be configured before joining the VCF and are
not eligible for the auto-provisioned configuration (plug and play). Adding a device
configured as mixed mode to a VCF can cause those devices to be marked inactive if the
other devices are not also configured as mixed mode. In both mixed mode and
homogeneous configurations, you must run the same Junos OS release on all devices.
In a QFX5100 VCF, the optimum configuration comprises only QFX5100 models. When
both the QFX5100-24Q and the QFX5100-48S are available in a VCF, use the
QFX5100-24Q as the spine.
In a QFX5110 VCF, the optimum configuration comprises only QFX5110 models. When
multiple models of QFX5110 are in a VCF, use the QFX5110-32Q as the spine. All QFX5110
VCF configurations are considered homogeneous.
Related
Documentation
Virtual Chassis Fabric Installation Overview on page 80
•
47 Copyright © 2017, Juniper Networks, Inc.
Chapter 5: Preparation Overview