Juniper QFX10016, Hardware Manual

Page: 137 / 439

Table 55: Valid ET Interface Link Combinations
Modulation Format Aggregate Data Rate OT Interface Data Rate ET Interface Configuration
Ports 0, 2, 1, 3, 5
16-QAM (x2) 4 x 100 Gigabit
Ethernet
200 Gbps 200 Gbps
0, 1, 2, 3 2 independent 200
Gbps 16-QAM
QPSK and 16-QAM 3 x 100 Gigabit
Ethernet 100 Gbps 200 Gbps 0, 2, 3 Independent QPSK and
16-QAM
16-QAM and QPSK 3 x 100 Gigabit
Ethernet 200 Gbps 100 Gbps 0, 1, 2 Independent QPSK and
16-QAM
8-QAM 3 x 100 Gigabit
Ethernet 150 Gbps 150 Gbps 0, 1, 2 2 Coupled 150 Gbps 8-
QAM
QPSK and QPSK 2 x 100 Gigabit
Ethernet 100 Gbps 100 Gbps 0,2 Independent 100G
QPSK
Table 56: Ethernet Link LEDs (ET Interfaces)
Color Description
Unlit The ET interface is down.
Solid Green The ET interface is up but there is no activity.
Blinking Green The link is up on the ET interface and there is activity.
1.2-Terabyte Per Second DWDM OTN Module Wavelengths
The PTX10K-LC1104 coherent line card and the QFX10000-12C-DWDM line card provide six 200-
Gbps coherent MACsec ports with built-in long-reach optics. DWDM channel frequency offsets are
126