Juniper QFabric QFX3008-I, Manual, Page: 326 / 472

•
Ensure that the rack is stable and secured to the building.
• Ensure that there is enough space to place the removed QFX3100 Director device in
its new location and along the path to the new location.
•
Read “General Safety Guidelines and Warnings” on page 161 .
•
Ensure that the QFX3100 Director device has been safely powered off and that you
have unplugged (disconnected) the power cords.
• Ensure that you have disconnected any cables or wires attached to the QFX3100
Director device ports.
Ensure that you have the following parts and tools available:
•
A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack
mounting screws, for mounting the QFX3100 Director device on the rack.
To remove a QFX3100 Director device from a rack or cabinet:
1.
Use the screwdriver to remove the mounting screws that attach the chassis
front-mounting brackets to the rack or cabinet.
2.
Place the removed screws in a labeled bag. You will need them when you reinstall
the chassis.
3.
Lift the QFX3100 Director device from the rack or cabinet and transport it to your
desired new location.
Related
Documentation
Mounting a QFX3100 Director Device on Two Posts in a Rack or Cabinet on page 215
•
•
Mounting a QFX3100 Director Device on Four Posts in a Rack or Cabinet on page 217
Removing a QFX3008-I Interconnect Device from a Rack or Cabinet
If you want to move an installed QFX3008-I Interconnect device to another location, you
need to remove it from the rack or cabinet in which it is installed. An installed device rests
on the mounting shelf. In a four-post rack, the front-mounting brackets (“ears”) attached
to the chassis are bolted to the rack. In a two-post rack, the mid-mounting brackets
(“ears”) attached to the chassis are bolted to the rack.
NOTE: When you remove multiple devices from a rack or cabinet, remove
the device in the top of the rack or cabinet first and proceed to remove the
rest of the switches from top to bottom.
Before removing a QFX3008-I Interconnect device from a rack or a cabinet:
• Ensure that the rack or cabinet is stable and secured to the building.
• Ensure that there is enough space to place the removed device in its new location and
along the path to the new location.
Copyright © 2012, Juniper Networks, Inc. 300
QFX3000 Hardware Documentation