Juniper NSM4000, Hardware Manual, Page: 160 / 196

Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Related
Documentation
General Safety Guidelines and Warnings on page 135
•
•
Laser and LED Safety Guidelines and Warnings for the NSM4000 Appliance on page 141
•
Grounded Equipment Warning on page 151
•
Connecting AC Power to the NSM4000 Appliance on page 35
•
Connecting DC Power to the NSM4000 Appliance on page 37
Chassis Lifting Guidelines for the NSM4000 Appliance
The approximate weights of the NSM4000 appliance is 28.05 lb (12.72 kg).
Observe the following guidelines for lifting and moving an NSM4000 appliance:
• Before installing an NSM4000 appliance, read the guidelines in “General Site Guidelines
for the NSM4000 Appliance” on page 21 .
•
Before lifting or moving the appliance, disconnect all external cables.
•
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Related
Documentation
General Safety Guidelines and Warnings on page 135
•
•
Installation Instructions Warning on page 145
•
Mounting the NSM4000 Appliance on page 30
Ramp Warning
WARNING: When installing the device, do not use a ramp inclined at more
than 10 degrees.
Waarschuwing Gebruik een oprijplaat niet onder een hoek van meer dan 10
graden.
Varoitus Älä käytä sellaista kaltevaa pintaa, jonka kaltevuus ylittää 10 astetta.
Attention Ne pas utiliser une rampe dont l'inclinaison est supérieure à 10
degrés.
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Copyright © 2016, Juniper Networks, Inc. 146
NSM4000 Appliance Hardware Guide