32 | Juniper Networks, Inc.
N
ET
S
CREEN
-IDP Q
UICK
S
HEET
Usernames &
Passwords
Sensor Login &
Configure
username: root
password: abc123
Management Server
Login
username: admin
password: you set this password during the Management Server
configuration process
Appliance
Configuration
Manager
URL
https://192.168.1.1; this is the default IP address of eth2, the
management interface. Because the ACM uses HTTPS, you MUST
enter https:// before the IP address.
Accessing
To configure the Sensor, you must use a computer that is on the
same network as the IDP appliance.
Management
Server
IDP 100
Recommended: install on a separate computer running Red Hat
7.2 or 8, RHEL AS/ES/WS 3, or Solaris 8/9. Can also install on the
Sensor.
IDP 10, 100, 500, 1000
Required: install on a separate computer running Red Hat 7.2 or
8, RHEL AS/ES/WS 3, or Solaris 8/9.
Interfaces &
IP Addresses
Management
interface: default is eth2
IP address: must be unique, default is 192.168.1.1
Bridge, Router, Proxy-
ARP, Transparent
interface: any interface; can use multiple interfaces
IP address: must be unique
IDP 500
IDP 1000
Serial Port
eth2
eth3
Power
eth0
DB-15 Video
Interface
Keyboard
Connector
Mouse
Connector
USB
Connector
eth1
IDP 10
Serial Port
eth3
eth0
Keyboard
Connector
Mouse
Connector
USB
Connector
eth1
eth2
Power
DB-15 Video
Interface
IDP 100
1
2
1
2
Serial Port
eth0
Keyboard
Connector
Mouse
Connector
USB
Connector
eth1
eth2
Power
DB-15 Video
Interface
1
2
Note:
The IDP 10 does not support a second Ethernet card or dual redundant power supply.
