Juniper MX480, Hardware Manual

Page: 49 / 420

AC Power Cord Specifications for the MX480 Router
Each AC power supply has a single AC appliance inlet located on the power supply that
requires a dedicated AC power feed. Most sites distribute power through a main conduit
that leads to frame-mounted power distribution panels, one of which can be located at
the top of the rack that houses the router. An AC power cord connects each power supply
to the power distribution panel.
You can order detachable AC power cords, each approximately 8 ft (2.5 m) long that
supply AC power to the router. The C19 appliance coupler at the female end of the cord
inserts into the AC appliance inlet coupler, type C20 (right angle) as described by
International Electrotechnical Commission (IEC) standard 60320. The plug at the male
end of the power cord fits into the power source receptacle that is standard for your
geographical location.
Table 16 on page 49 provides specifications and Figure 13 on page 50 depicts the plug on
the AC power cord provided for each country or region.
Table 16: AC Power Cord Specifications
Plug Type
Electrical
Specification
Model Number Country
SAA/3/15 240 VAC, 50 Hz AC CBL-M-PWR-RA-AU Australia
CH2-16P 220 VAC, 50 Hz AC CBL-M-PWR-RA-CH China
CEE 7/7 220 or 230 VAC, 50 Hz
AC CBL-M-PWR-RA-EU Europe (except Denmark, Italy, Switzerland,
and United Kingdom)
CEI 23-16/VII 230 VAC, 50 Hz AC CBL-M-PWR-RA-IT Italy
JIS 8303 125 VAC, 50 or 60 Hz
AC CBL-PWR-RA-JP15 Japan
NEMA L6-20P 220 VAC, 50 or 60 Hz
AC CBL-M-PWR-RA-JP
NEMA 5-15P 125 VAC, 60 Hz AC CBL-PWR-RA-US15 North America
NEMA L5-15P 125 VAC, 60 Hz AC CBL-PWR-RA-TWLK-US15
NEMA 6-20 250 VAC, 60 Hz AC CBL-M-PWR-RA-US
NEMA L6-20P 250 VAC, 60 Hz AC CBL-M-PWR-RA-TWLK-US
BS89/13 240 VAC, 50 Hz AC CBL-M-PWR-RA-UK United Kingdom
49 Copyright © 2019, Juniper Networks, Inc.
Chapter 1: Overview