Juniper MX2010, Hardware Manual, Page: 84 / 825

NOTE: Use sheilded CAT5e cable for connecting the AUX, CONSOLE, and MGMT ports.
•
EEPROM in RE—Stores the field replacement unit (FRU) details of the RE.
•
EEPROM in CB—Stores the field replacement unit (FRU) details of the CB.
•
RESET button—Reboots the Routing Engine on the CB-RE when pressed.
•
ONLINE/OFFLINE button—Makes the Routing Engine on the CB-RE online or offline when pressed.
NOTE: The ONLINE/OFFLINE button must be pressed for a minimum 4 seconds for the
power off or power on to occur.
•
LEDs—Provide status of the Routing Engine on the CB-RE.
REMX2K-X8-128G CB-RE LEDs
Figure 25: REMX2K-X8-128G CB-RE LEDs
AUX MGMT
DISK1
DISK2 RESET
ONLINE/
ONLINE
OK/
FAIL
MASTER
1
XGE-0 XGE-1
LINK
EXTCLK-0 EXTCLK-1
BITS
GPS
UTI
OK/FAIL
CONSOLE
g100079
2
OFFLINE
REMX2K-X8-128G
REMX2K-X8-128G
1 3 2 4
3
—
1
—
BITS, GPS, and UTI LEDs ONLINE LED, OK/FAIL LED, and MASTER LED
4
—
2
—
ONLINE/OFFLINE button DISK1 and DISK2 LEDs
Table 20: REMX2K-X8-128G CB-RE LEDs
Description State Color Label
Routing Engine is in the process of booting BIOS, and the
host OS.
Blinking slowly Green ONLINE
Routing Engine is in the process of booting Junos OS. Blinking rapidly
Routing Engine is not online or not functioning normally. Off -
60