Juniper MX2010, Hardware Manual, Page: 34 / 825

•
Center-mounting metal brackets for center-mounting in an open-frame rack (optional).
CAUTION: Before removing or installing components, attach an ESD strap to an ESD
point, and place the other end of the strap around your bare wrist. Failure to use an
ESD strap could result in damage to the hardware components.
WARNING: The router must be connected to earth ground during normal operation.
The chassis with standard cable managers and EMI cover measures 59.50 in. (151.13 cm) high,
19 in. (48.26 cm) wide, and 36.20 in. (91.95 cm) deep (from the front-mounting flanges to the rear of the
chassis). An extended cable manager extends the depth to 40.15 in. (102 cm).
One router can be installed in a 34-U or taller open-frame or four-post rack if the rack can support the
combined weight, which can be greater than 985 lb (446.79 kg).
NOTE: The dimensions also include the cable managers and EMI cover.
Figure 1: Front View of a Fully Configured MX2010 Router Chassis
g007400
OK/FAIL
OK/FAIL
OK/FAIL
OK/FAIL
OK/FAIL
OK/FAIL
OK/FAIL
OK/FAIL
1
2
3
5
4
8