Juniper MX2010, Hardware Manual, Page: 237 / 825

Reinstalling Components in the MX2010 Router After Initially Installing the Router in a Rack | 275
Tools Required to Install the MX2010 Router Using a Router Transport Kit
To install the router by using a router transport kit, you need the following tools and equipment:
•
Router transport kit (model number MX2K-TRNSPRT-KIT)
•
Front component shipping cover
•
Rear component shipping cover
•
Phillips (+) screwdrivers, numbers 1, 2, and 3
•
1/2-in. (12.7 mm) drive ratchet
•
1/4-in. (6.35 mm) torque-controlled driver or socket wrench to tighten the nuts on the router transport
kit
•
1-1/8-in. (28.57 mm) torque-controlled driver or socket wrench to tighten the router transport kit winch
mechanism
•
9/16-in. or 14-mm open-end or socket wrench with extension to remove bracket bolts from the shipping
pallet
•
Electrostatic discharge wrist strap
•
Antistatic mat
RELATED DOCUMENTATION
Overview of Preparing the Site for the MX2010 Router | 125
Installing the MX2010 Router Using a Pallet Jack with Attachment | 253
Reinstalling Components in the MX2010 Router After Initially Installing the Router in a Rack | 275
Tools and Parts Required to Maintain the MX2010 Hardware Components
To maintain hardware components, you need the following tools and parts:
•
ESD grounding wrist strap
•
Flat-blade (–) screwdriver
•
Phillips (+) screwdriver, number 1 and number 2
218