Juniper MX10004, Hardware Manual

Page: 57 / 290

Table 16: JNP10K-PWR-AC2 Power Cable Specifications for 20-A Input
(Continued)
Locale Cord Set Rating Plug Standard Spare Juniper Model
Number Graphic
South Africa 16 A, 250 VAC SANS 164/1 CBL-JNP-SG4-SA
Switzerland 16 A, 250 VAC CEI 23-50 CBL-JNP-SG4-SZ
JNP10K-PWR-AC2 Power Cable Specifications for 30-A Input
The JNP10K-PWR-AC2 HVAC or HVDC power supplies require a high-current cable assembly when set
for 30-A input. One end of the cable has an Anderson APP-400 connector, while the other end of the
cable is bare wire. See
Figure 21 on page 48 and Table 17 on page 48 . These cables are separately
orderable and are not shipped automatically with JNP10K-PWR-AC2 orders. An example of the right-
angle cable and connector is shown in
Figure 23 on page 49 .
47