Juniper Junos Space JA1500, Hardware Manual

Page: 77 / 210

> Node display name is "node1"
> Password for Junos Space maintenance mode is set.
A> Apply settings
C> Change settings
Q> Quit and set up later
R> Redraw Menu
Choice [ACQR]:
i.
Perform one of the following actions:
•
To apply the settings, type A .
The settings that you configured are applied and a series of messages is
displayed on the console, and then the Junos Space Settings Menu is displayed
as shown in the following example:
Junos Space Settings Menu
1> Change Password
2> Change Network Settings
3> Change Time Options
4> Retrieve Logs
5> Security
6> (Debug) run shell
A> Apply Settings
Q> Quit
R> Redraw Menu
Choice [1-6,QR]:
•
To change the settings, type C .
You are prompted to reenter all the basic configuration information that you
have configured up to this point.
• To quit the configuration without applying the settings, type Q .
The Junos Space Settings Menu is displayed.
CAUTION: If you quit the configuration without applying the
settings, then all the settings are discarded.
j.
(Optional) If you have applied the settings, then type Q to exit the Junos Space
Settings menu.
You are taken to the console login prompt.
63 Copyright © 2018, Juniper Networks, Inc.
Chapter 7: Performing Initial Configuration