Juniper JSA3800, Hardware Manual, Page: 34 / 92

Table 12: DB-9 Console Connector Pinouts for the JSA3800 Appliance (continued)
Description Signal Pin
Transmit Data TxD Output 3
Data Terminal Ready DTR Output 4
Chassis Ground GND 5
Data Set Ready DSR Input 6
Request to Send RTS Output 7
Clear to Send CTS Input 8
Ring Indicator RI 9
Not Connected NC 10
6.
Push the Power button on the front panel.
The Power LED below the power button turns on.
See Also Connecting the JSA3800 Appliance to a Management Device on page 43
•
•
Connecting the JSA3800 Appliance to Ground on page 41
•
Connecting the JSA3800 Appliance to a DC Power Source on page 41
Installing the JSA3800 Appliance Using Front-and-Rear-Mounting Flush in a Four-Post Rack
The JSA3800 appliance uses this mounting option as its default configuration. The rack
mounting kit includes two rack rail assemblies. Each assembly consists of an inner fixed
chassis rail that is secured to the server chassis and an outer fixed rack rail that is secured
to the rack.
Copyright © 2019, Juniper Networks, Inc. 34
Juniper Secure Analytics 3800 Hardware Guide