Juniper JRR200, Hardware Manual

Page: 52 / 108

flag all;
}
}
}
}
Viewing Factory-Default Settings of JRR200 Route Reflector
To view the factory-default settings on your JRR200 route reflector:
1.
Log in as the root user and provide your credentials.
2.
View the list of default config files:
user@host>file list /etc/config
3.
View the required default config file.
user@host> file show /etc/config/<config file name>
When you commit changes to the configuration, a new configuration file is created, which
becomes the active configuration. If the current active configuration fails, you can use
the
load factory-default command to revert to the factory-default configuration.
Copyright © 2018, Juniper Networks, Inc. 52
JRR200 Route Reflector Hardware Guide