Juniper J4350, Getting Started Manual

Page: 131 / 284

Establishing Basic Connectivity
Table 37: Configuring Basic Settings (continued)
Task J-Web Configuration Editor CLI Configuration Editor
Add each domain that the router
belongs to.
1.
Next to Domain search, click Add
New Entry .
2. In the Value box, type the name
of the domain in which the
router is located—for example,
lab.router.net .
3. Click OK .
4.
Next to Domain search, click Add
New Entry .
5.
In the Value box, type the name
of another domain that the
router belongs to—for example,
router.net .
6. Click OK .
Set the domains to be searched. For
example:
set domain-search lab.router.net
set domain-search router.net
Define the backup router to be used
when the router is booting or the routing
protocol processes are not running. In the Backup router section, next
to Address, type the IP address of
the backup router—for example,
192.168.2.44 .
Set the address for the backup router.
For example:
set backup router address
192.168.2.44
Configuring Basic Settings with a Configuration Editor
111