Juniper HarvestMaster GRAINGAGE H2 STATIONARY, User Manual, Page: 24 / 95

H2 Stationary GrainGage User’s Guide
24 Mirus and H2 Stationary GrainGage Setup
2 .3 Setup the H2 Stationary GrainGage
2.3.1 Open Setup
On the Home screen,
1. Tap Setup .
Mirus opens the Setup screen.
2.3.2 Configure Actuator
Note: Changing actuator times should only be done under the direction of a HarvestMaster Field Service
Engineer. This is especially true if you intend to shorten the times.
The Setup screen opens by default to Devices. This is
where you will set up your GrainGage.
1. Tap H2 GrainGage .
Setup