Juniper EX3300 Hardware Manual Download Page 59 | Manualshive

Page: 59 / 272

Juniper EX3300 Hardware Manual Download Page 59

Table 20: Chassis Viewer for EX2200 Switches

(continued)

Description

Field

Rear View

The management port is used to connect the switch to a management device for out-of-band
management.

Management (

me0

) port

The console port is used to connect the switch to a management console such as a laptop or
a PC. (You might do this for initial switch configuration.)

Console port

Indicates the USB port for the switch.

NOTE:

We recommend that you use USB flash drives purchased from Juniper Networks for

your EX Series switch.

USB port

Mouse over the fan tray icon to display name, status, and description information.

Fan tray

Mouse over the power outlet icon to display name, status, and description information.

Power supply

Table 21: Chassis Viewer for EX2200-C and EX2300-C Switches

Description

Field

Front View

In the image, the following colors denote the interface status:

•

Green—Interface is up and operational.

•

Yellow—Interface is up but is nonoperational.

•

Gray—Interface is down and nonoperational.

Mouse over the interface (port) to view more information.

Interface status

The management port is used to connect the switch to a management device for out-of-band
management.

Management (

me0

) port

The console port is used to connect the switch to a management host such as a PC or a laptop.
(You might do this for initial switch configuration.)

Console port

Indicates the USB port for the switch.

NOTE:

We recommend that you use USB flash drives purchased from Juniper Networks for

your EX Series switch.

USB port

Indicates the mini-USB port for the switch. This is used to connect the switch to a management
console such as a laptop or a PC. (You might do this for initial switch configuration.)

NOTE:

The mini-USB console port is available on EX2300-C switch and is unavailable on

EX2200-C switch.

We recommend that you use USB flash drives purchased from Juniper Networks for your EX Series
switch.

Mini- USB console port

Rear View

37

Copyright © 2016, Juniper Networks, Inc.

Chapter 5: Viewing System Information

«
...
57
58
59
60
61
...
»

Summary of Contents for EX3300

















































































































































































































































































Reviews:

No comments