E3 Frame Module Combination (12 Ports)
COCX-F3
Line module label
E3-12
FRAME I/O
I/O module label
•
12
Number of I/O ports
•
First supported: 4.0.2
•
Final supported: 14.0.x
Software release
•
135 W
•
Unchannelized E3 for Frame
Description
•
EFA ASIC
Type
•
E3
•
HDLC framing
Capability
•
See
ERX Module Guide, Appendix A, Module Protocol Support
for information
about the layer 2 and layer 3 protocols and applications that this module
combination supports.
Software features
•
ERX7xx models
•
ERX14xx models
•
ERX310 router
Model compatibility
•
SRP-5G+
•
SRP-10G
•
SRP-40G
•
SRP-40G PLUS
•
SRP-SE10G
SRP module compatibility
•
1:N redundancy
•
NOTE:
Line module redundancy is not supported on the ERX310 router.
Module redundancy support
•
BT43 SMB connector
•
Cable that adapts to 75-ohm BNC is available.
•
The transmitted signal complies with ITUT G.703, Physical/electrical
characteristics of hierarchical digital interfaces (November 2001) for cable
lengths from 0–137 m (0–450 feet).
•
See
ERX Hardware Guide, Chapter 5, Cabling ERX Routers
for more information.
Cables and connectors
•
See
ERX Module Guide, Appendix B, Module LEDs
.
LEDs
•
See
Monitoring Interfaces
in
JunosE Physical Layer Configuration Guide, Chapter 2,
Configuring T3 and E3 Interfaces
.
Alarms, errors, and events
Copyright © 2010, Juniper Networks, Inc.
28
E Series End-of-Life Module Guide
